Changes to Step #14
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the Bed Assembly |
|---|---|
| + | [* 1] Apply a drop of oil to the tip of the threads on the three ***30034 6-32 x 1.75"L Phillip Pan Head Screw - SS*** |
| + | [* 1] Pass the pan head screws through the mounting holes on the heat spreader, then through the ***84612 Bed Mounting Post (PEEK)***, the melamine frame of the printer, then the ***30450 #6 SAE Flat Washer - SS*** with the three remaining 30164 nylon lock nuts |
Image 1
No previous image
Added
Image 2
No previous image
Added