Skip to main content

Changes to Step #13

Edit by Caleb Fairres

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

+[title] Installing the Bed Wiring (cont'd)
+[* 1] Pass the silicone heater wires through the existing plastic bed insulator as shown.
+[* 1] Strip the wires from the heater and attach one of the wires to the black wire leading from the SSR terminal number 2, using the ***26228 Splice Conn. Insul. 10-16AWG Crimp*** connector
+[* 1] Attach the other white wire to the white wire leading from N on the power supply
+[* 1] Plug in the SL connector you installed on the thermistor leads to the SMC-T1 thermistor board
+[* 1] Apply electrical tape to the white wires coming from the silicone heater as shown to cover the wires when folded back towards the bed.

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added