Changes to Step #12

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Installing the Bed Wiring
-[* 1] Strip a 1/4" off of the remaining large black wire from the kit, and crimp a large wire ring terminal to one end.
+[* 1] Strip a 1/4" off of the remaining large black wire from the kit, and crimp a 26178 yellow ring terminal to one end.
[* 1] Attach the ring terminal you just crimped to the SSR in terminal number 2.
[* 1] Strip 10mm off the other end of the black wire
[* 1] Re-install the clear plastic cover on the SSR