Changes to Step #12
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the Bed Wiring |
|---|---|
| + | [* 1] Strip a 1/4" off of the remaining large black wire from the kit, and crimp a 26178 yellow ring terminal to one end. |
| + | [* 1] Attach the ring terminal you just crimped to the SSR in terminal number 2. |
| + | [* 1] Strip 10mm off the other end of the black wire |
| + | [* 1] Re-install the clear plastic cover on the SSR |
Image 1
No previous image
Added