Changes to Step #11
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| [title] Crimping the Thermistor Wires | |
| + | [* 1] he existing white 26awg wires exiting the Y tower (that you snipped from the old bed) |
| [* 1] Use the included SL terminals and a pair of crimpers to crimp the terminals to the ends of the white wires. | |
| - | [* 1] he existing white 26awg wires exiting the Y tower (that you snipped from the old bed) |
| [* 1] Be sure the thermistor wires are about 400mm in length from where they exit the Y tower. |