Changes to Step #11
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Crimping the Thermistor Wires |
|---|---|
| + | [* 1] Strip about 5mm of the existing white 26awg thermistor wires exiting the Y tower (that you snipped from the old bed) |
| + | [* 1] Be sure the thermistor wires are about 400mm in length from where they exit the Y tower. |
| + | [* 1] Use the included ***26205 SL Crimp Terminals for Molex Latching Connectors*** and a pair of crimpers to crimp the terminals to the ends of the white wires. |
| + | [* 1] House them in the ***26202 Molex SL 2 Pin Latching Connector Housing Female***, making sure they are inserted all the way with a click. |
Image 1
No previous image
Added
Image 2
No previous image
Added