Changes to Step #9
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the Bed Clamps |
|---|---|
| + | [* 1] Install the three ***58815 Build Plate Clamp for 3mm Boro Glass - Black*** as shown, using the ***30308 M3 - .50 x 18mmL Phillip PH Machine Screw - SS***, and three of the ***30321 M3 - 0.50 Nylon Lock Nut - SS*** |
| + | [* 1] Tighten to feel, where it's snug but the clamp still turns, firmly. |
| + | [* 1] Install the second Nylon Lock Nut and tighten so the first nut won't come loose. |
| + | [* 1] Apply the ***26659 Kapton Dot 1 inch Dia ***as shown, under the clamping portion of the bed clamp. |
| + | [* 9] It is very important that the kapton dots are applied properly, in the proper location and with little to no air bubbles! |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added