Changes to Step #9
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the Bed Clamps |
|---|---|
| + | [* 1] Install the three bed clamps as shown, using the M3 x 18mm pan head screws, and M3 Stainless Nylon Locknut |
| + | [* 1] Tighten to feel, where it's snug but the clamp still turns, but firmly. |
| + | [* 1] Install the second Nylon Lock Nut and tighten so the first nut won't come loose. |
| + | [* 1] Apply the kapton dots as shown, under the clamping portion of the bed clamp. |
| + | [* 9] It is very important that the kapton dots are applied properly, in the proper location and with little to no air bubbles! |