Changes to Step #7
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] AC Main Power Wiring |
|---|---|
| + | [* 9] Be certain your machine is not plugged in to power before continuing! |
| + | [* 1] Strip 1/4" off the white and black wires included in the kit, and crimp one ring terminal to one end of the white wire, and one ring terminal to each end of the black wire. |
| + | [* 1] Attach the white to N and black to L on the power supply, as shown in the photo. |
| + | [* 10] Note: It's recommended to turn the existing red ring terminals upside down when installing them both on the same screw, as shown in the photo. |
| + | [* 1] Attach the other end of the black wire to the SSR terminal number 1. |
Image 1
No previous image
Added
Image 2
No previous image
Added