Changes to Step #6
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Connect the DC bed power to the SSR |
|---|---|
| + | [* 1] Strip 1/4" off the end of each of the existing black and red 12awg bed wires that were previously snipped. |
| + | [* 1] Crimp the ***26178 Ring Terminal Yellow Insulated for #8 Stud and 12awg*** as shown to the ends of the wires. |
| + | [* 1] Attach the red wire to the V+ terminal number 4, and black DC- to terminal number 3 on the SSR |
Image 1
No previous image
Added
Image 2
No previous image
Added