Changes to Step #5

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Drill Holes & Mount SSR
-[* 1] Remove the clear plastic cover from the SSR
+[* 1] Remove the clear plastic cover from the 26193 SSR
[* 1] Place the SSR in the machine as shown
[* 1] Mark and drill the mounting holes using the 4mm (5/32") drill
[* 1] Position the AC output side of the SSR near the Y tower
-[* 1] Use two 6-32 x 5/8 Pan Heads and 6-32 Stainless Nylon Lock Nuts to secure the SSR in place
+[* 1] Use the two 30117 6-32 x 5/8"L Phillip Pan head - SS and two 30164 6-32 Nylon Lock Nut - SS to secure the SSR in place
[* 10] During this step would be a good time to vacuum or blow out the sawdust from your machine.