Changes to Step #5
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| [title] Drill Holes & Mount SSR | |
| + | [* 1] Remove the clear plastic cover from the SSR |
| [* 1] Place the SSR in the machine as shown | |
| [* 1] Mark and drill the mounting holes using the 4mm (5/32") drill | |
| [* 1] Position the AC output side of the SSR near the Y tower | |
| [* 1] Use two 6-32 x 5/8 Pan Heads and 6-32 Stainless Nylon Lock Nuts to secure the SSR in place |