Changes to Step #5

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Drill Holes & Mount SSR
-[* 1] Place SSR as shown
-[* 1] Mark and drill holes
-[* 1] Position AC output side of SSR near tower
-[* 1] Use two 6-32 x 5/8 Pan Heads and 6-32 Stainless Nylon Lock Nuts to secure in place
+[* 1] Place the SSR in the machine as shown
+[* 1] Mark and drill the mounting holes using the 4mm (5/32") drill
+[* 1] Position the AC output side of the SSR near the Y tower
+[* 1] Use two 6-32 x 5/8 Pan Heads and 6-32 Stainless Nylon Lock Nuts to secure the SSR in place