Skip to main content

Changes to Step #5

Edit by Caleb Fairres

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

+[title] Drill Holes & Mount SSR
+[* 1] Remove the clear plastic cover from the ***26193 SSR***
+[* 1] Place the SSR in the machine as shown
+[* 1] Mark and drill the mounting holes using the 4mm (5/32") drill
+[* 1] Position the AC output side of the SSR near the Y tower
+[* 1] Use the two ***30117 6-32 x 5/8"L Phillip Pan head - SS*** and two ***30164 6-32 Nylon Lock Nut - SS*** to secure the SSR in place
+[* 10] During this step would be a good time to vacuum or blow out the sawdust from your machine.

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added

Image 3

No previous image

New image

Added