Changes to Step #7

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

+[title] Complete & Calibrated
+[* 9] Remember DO NOT use the button labeled "Auto Delta Calibration" Instead we use the macros we wrote.
+[* 9] Remember NEVER use software auto leveling in any slicing software. Auto leveling and calibration is performed by the firmware on ALL SeeMeCNC 3D printers.
+[* 1] Remember when cleaning glass or changing a nozzle to use "Probe Autolevel" calibration macro.
+[* 1] The "Probe Autolevel" macro calibrate your printer using SeeMeCNC developed g-code.