Changes to Step #5

Edit by Andy Oprisko —

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

[title] Update the config.g
[* black] Settings>System Editor
[* black] Edit config.g - locate line M665, usually about 10 or 12 lines down.
- [* blue] Artemis 300 set L to 337.0 (L337)
+ [* blue] Artemis 300 set L to 340.5 (L340.5)
[* blue] RostockMAX v3.2 set L to 340.5 and H to 350.
[* icon_caution] If you do not change the H value, the machine will crash into the glass before being able to probe. The carbon fiber arms are longer than stock arms, shortening the max Z length.
+[* icon_note] The arm length value is a starting point. Although the arms are made in a precision jig, there may be variances and this value may need to be slightly adjusted if you are looking to print parts with specific size values. Adjusting and re-calibrating may be needed to tweak the final print size output.