Skip to main content

Changes to Step #5

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

[title] Update the config.g
[* black] Settings>System Editor
[* black] Edit config.g - locate line M665, usually about 10 or 12 lines down.
[* blue] Artemis 300 set L to 337.0 (L337)
- [* blue] RostockMAX v3.2 (to be determined, start with 340mm)
+ [* blue] RostockMAX v3.2 set L to 340.5 and H to 350.
+ [* icon_caution] If you do not change the H value, the machine will crash into the glass before being able to probe. The carbon fiber arms are longer than stock arms, shortening the max Z length.