Changes to Step #40
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Bed Thermistor Wires |
|---|---|
| + | [* 1] Your final two white 26awg wires exiting the Z tower in the bottom assembly will connect to the white toggle connector as shown. |
| + | [* 9] Make sure the connection is solid in this white connector. If they slip out, you will have to remove the bottom cover later to troubleshoot thermistor issues! |
Image 1
No previous image
Added
Image 2
No previous image
Added