Changes to Step #37

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

-[title] Power Plug Connections
+[title] IEC Connections
[* 1] Locate the black and green wires with crimped connectors exiting the Z tower shown. Also locate the short white wire with crimped connector from your Z tower wire pack.
-[* 1] Install them as shown on the power connector.
-[* 1] Install the power connector using the M3 screws and nylon lock nuts included in your kit.
+[* 1] Install them as shown on the IEC connector.
+[* 1] Install the IEC connector using the M3 screws and nylon lock nuts included in your kit.