Changes to Step #26
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] X Tower Motor Connector |
|---|---|
| + | [* 1] The X tower motor connector (black 4-pin red, green, yellow, blue wires) will install in the X stepper position on the board. |
| + | [* 9] Plug the connector in so that the smooth flat side of the black connector is facing the outer edge of the Duet. |
Image 1
No previous image
Added
Image 2
No previous image
Added