Changes to Step #17
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the X Tower Continued |
|---|---|
| + | [* 1] You will now lift the tower and slowly slide it into the upper assembly. The tower assembly will clear the limit switch. As you are sliding it into place you will need to ensure that the wires stay down in their relief, otherwise they will get pinched when tightening the plate. |
| + | [* 9] Make sure to look from the outside of the tower towards the center of the upper assembly and ensure that the wires are ALL in their relief. |
Image 1
No previous image
Added
Image 2
No previous image
Added