Changes to Step #51
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Install the Base Cover |
|---|---|
| + | [* 1] You will now re-install the base cover. Before doing so, make sure all wires are secured and not going to interfere with its installation. If you find a loose wire, use a zip tie to secure it to a piece of T-Slot. |
| + | [* 1] Most Artemis 300s were shipped with Removable Plastic Rivets. These easily press in and secure the sheet metal enclosure (and are easily removable for future needs) |
| + | [* 9] Remember, if your sheet metal enclosure is secured with screws, DO NOT use power tools to tighten the cover screws! |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added