Changes to Step #49
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the PTC Clips |
|---|---|
| + | [* 1] Slide a PTC clip onto the Bowden tube as shown. |
| + | [* 1] Insert the Bowden Tube into the top of the hot end. |
| + | [* 1] Lift up on the black ring in the top of the hot end and slide the PTC clip into the groove between the black ring and the aluminum adapter. |
| + | [* 1] Perform the same operation on the EZR Struder side. NOTE: approximately 45mm of Bowden Tube will insert into the EZR Struder. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added