Changes to Step #43
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing Ball Joints |
|---|---|
| + | [* 1] Flip the printer back over and put it on a work surface. Team lifting may be required, as the printer is heavy. |
| + | [* 1] Locate and install the metal ball joints. Each ball joint is installed onto the carriage with (2) 1/2" long #4 sheet metal screws and #4 washer. |
| + | [* 1] Complete this operation for all 3 towers. |
Image 1
No previous image
Added
Image 2
No previous image
Added