Changes to Step #38
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the IEC Connector |
|---|---|
| + | [* 1] You will secure the IEC Connector to the sheet metal with M3 x 10mm screws and nylon lock nuts. |
| + | [* 1] These nuts are hard to get to. It is easiest to hold them with a pair of needle nose pliers, and even better if you have angled needle-nose pliers. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added