Changes to this Step
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] IEC Connector |
|---|---|
| + | [* 1] Route the 18awg white, green, and black wires with right angle spade connectors between the T-Slot and the Sheet Metal. and out the rectangular opening in the side of the base assembly. |
| + | [* 1] Connect the wires to the IEC connector as shown. |
| + | [* 1] Green = Ground |
| + | [* 1] Black = L (Line) |
| + | [* 1] White = N (Neutral) |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added