Changes to this Step
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Wire Connections |
|---|---|
| + | [* 10] Machines starting in February 2018 have a 3 position Wago attached to the heated bed red wire eliminating the need for an extra Wago connector. Machines before February 2018 may have an extra Wago 2 position connector. |
| + | [* 1] Machines February 2018 and later use a 3 position Wago for connection to the 2 white wires. |
| + | [* 1] Machines before February 2018 and earlier: In the other side of the Wago connector, SIDE BY SIDE (AS SHOWN) install the 2 short 18awg white wires from the Z Tower wire pack . |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added