Changes to Step #20

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Wago Connector Information
-[* 1] THIS IS AN INFORMATIONAL STEP FOR THE NEXT PROCEDURE. NO ACTION IS NEEDED FOR THIS STEP.
+[* 1] THIS IS AN INFORMATIONAL STEP FOR FUTURE PROCEDUREs. NO ACTION IS NEEDED FOR THIS STEP.
[* 1] There is a wire strip length gauge on the side of the Wago connector. When you use this connector, make sure that the ends of the wire that are going to be in the Wago are stripped the appropriate length.
[* 1] 11mm is the correct wire strip length.