Changes to this Step
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Wire Taming |
|---|---|
| + | [* 1] Install a wire clamp on the top of the power supply in a location similar to the image. (Your machine may already have this installed) |
| + | [* 1] Secure the end-stop wires in this wire clamp. |
| + | [* 1] Bundle together the wires from the Z Tower and secure them with a zip tie. |
| + | [* 1] Bundle together the wires from the X Tower and secure them with a zip tie. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added