Changes to this Step
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Wire Connections |
|---|---|
| + | [* 1] Locate the 18awg green and white wires with ring terminals. |
| + | [* 1] You will install these onto the power supply input. Remove the screws on the ground and N (neutral) terminals. |
| + | [* 1] Secure with the screw - Green goes to ground |
| + | [* 1] Secure with the screw - White goes to N (Neutral) |
Image 1
No previous image
Added
Image 2
No previous image
Added