Changes to this Step
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Wire Connections |
|---|---|
| + | [* 1] We will now begin making the connections to the Duet board. |
| + | [* 1] Begin with connecting the X Stepper motor in the location indicated by a blue arrow in the image with the blue circle.*** **** Machines AFTER 3/20/2018: Motors can have a black connector and different color wiring, They are connected with the smooth side of the plug facing away from the Duet as shown in picture 3. ******* |
| + | [* 1] Next connect the Y Stepper motor in the location indicated by a red arrow in the image with the blue circle. |
| + | [* 1] Install a cable clamp (provided) above the X tower and tame the X stepper motor wires with it. DO NOT CLOSE THE CLAMP YET! |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added