Changes to Step #15
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Prepare Printer |
|---|---|
| + | [* 1] For dual extrusion, you will want to set the filament to the correct places to prepare for a print. |
| + | [* 1] Ext 0 (Extruder on X tower for Artemis) should have the filament fully fed into the machine into the hotend as to be prepared for normal printing. |
| + | [* 1] Ext 1 (Additional extruder) should have the filament fed to approx. 45mm above the filament splitter. |
Image 1
No previous image
Added