Changes to Step #14
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Prepare to print. |
|---|---|
| + | [* 1] When you are ready to print click Prepare in the bottom right hand corner. It is recommended that you first check the layer/slice preview. This is located in a drop down near the top of the screen. Change from Solid View to Layer View You can use the slider to preview the slice prior to printing. |
| + | [* 1] When you are ready to print click the Save to File or Save to Removable Drive button in the bottom right hand corner. If you print via a Raspberry Pi (OctoPrint / AstroPrint) choose Save to File. You can then choose where to save the file and later transfer it. |
| + | [* 1] After you have saved the file, Cura will provide you with the file location, name, and the option to eject the memory device. |
Image 1
No previous image
Added
Image 2
No previous image
Added