Changes to Step #2

Edit by Andy Oprisko —

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

[title] Download Cura
-[* 1] SeeMeCNC settings and slicing profiles are currently aligned to work properly with version 3.4.1 and reported to work with 3.5.x.
-[* 9] Problems have been reported with dual feeding and Cura 3.6.x version and newer.
+[* 1] SeeMeCNC settings and slicing profiles are currently aligned to work properly with version 3.5 or 3.5.1.
+[* 9] ***Problems have been reported with dual feeding and Cura 3.6.x version and newer.***
[* 10] Also note we DO NOT recommend printing over USB. Upload to the printer or use an SD card on the control screen if you purchased a control screen option.
[* 1] Cura can be downloaded here: [https://ultimaker.com/en/products/ultimaker-cura-software/list|Cura|new_window=true]