Changes to Step #3
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Edit config.g for your steps/mm 0.9 Degree Steppers |
|---|---|
| + | [* 9] These are the values for 0.9 degree stepper motors. |
| + | [* 1] Change values of these two lines starting with "M92 ....." |
| + | [* 1] 0.9 degree stepper and 20 tooth pulley settings: |
| + | [* 1] M92 X160 Y160 Z160 |
| + | [* 1] M92 E182.0:182.0 |
| + | [* 1] 0.9 Degree stepper and 16 tooth pulley settings: |
| + | [* 1] M92 X200 Y200 Z200 |
| + | [* 1] M92 E182.0:182.0 |
Image 1
No previous image
Added