Changes to Step #2

Edit by Andy Oprisko —

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[title] Edit config.g for your steps/mm
+[title] Edit config.g for your steps/mm 1.8 Degree Steppers
[* 9] ***These are the values for 1.8 degree stepper motors***
[* 1] Change values of these two lines starting with "M92 ....."
[* 1] 1.8 degree stepper and 20 tooth pulley settings:
[* 1] M92 X80 Y80 Z80
[* 1] M92 E91.0:91.0
[* 1] 1.8 Degree stepper and 16 tooth pulley settings:
[* 1] M92 X100 Y100 Z100
[* 1] M92 E91.0:91.0