Changes to Step #2
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| [title] Edit config.g for your steps/mm | |
| + | [* 9] ***These are the values for 1.8 degree stepper motors*** |
| [* 1] Change values of these two lines starting with "M92 ....." | |
| - | [* 1] 1.8 degree stepper settings: |
| + | [* 1] 1.8 degree stepper and 20 tooth pulley settings: |
| + | [* 1] M92 X80 Y80 Z80 |
| + | [* 1] M92 E91.0:91.0 |
| + | [* 1] 1.8 Degree stepper and 16 tooth pulley settings: |
| [* 1] M92 X100 Y100 Z100 | |
| - | [* 1] M92 E91.0:91.0 |
| - | [* 1] 0.9 degree stepper settings: |
| - | [* 1] M92 X200 Y200 Z200 |
| [* 1] M92 E91.0:91.0 |