Changes to Step #2

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[title] Change steps/mm for your motors
+[title] Edit config.g for your steps/mm
[* 1] Change values of these two lines starting with "M92 ....."
[* 1] 1.8 degree stepper settings:
[* 1] M92 X100 Y100 Z100
[* 1] M92 E91.0:91.0
[* 1] 0.9 degree stepper settings:
[* 1] M92 X200 Y200 Z200
[* 1] M92 E91.0:91.0