You're viewing a previously published revision of this guide. View latest revision

Dec 22, 2016 - 08:12:42

Aug 07, 2017 - 12:08:23 Dec 28, 2016 - 11:12:31 Dec 28, 2016 - 11:12:43 Dec 22, 2016 - 08:12:42 Dec 22, 2016 - 08:12:18 Dec 22, 2016 - 08:12:29 Dec 22, 2016 - 08:12:56 Dec 22, 2016 - 08:12:00 Dec 22, 2016 - 08:12:42 Dec 22, 2016 - 08:12:59 Dec 22, 2016 - 08:12:49 Dec 22, 2016 - 08:12:28 Dec 22, 2016 - 08:12:13 Dec 22, 2016 - 07:12:50 Dec 22, 2016 - 07:12:24 Dec 22, 2016 - 07:12:11 Dec 22, 2016 - 07:12:04 Dec 22, 2016 - 07:12:53 Dec 22, 2016 - 07:12:14 Dec 22, 2016 - 07:12:09

Newer

LCD Enclosure

Written By: SeeMeCNC (and one other contributor)

Comments: 3
Favorites: 0
Completions: 24

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 The OEM Parts

Locate the LCD pack of parts from your kit or order.

If your kit / printer is equipped with a RAMBo board you will have a RAMBo / LCD Adapter Board in your kit this is identified in the 3rd picture. This adapteer board is not required when using the LCD with Mini-RAMBo boards.

Locate the LCD pack of parts from your kit or order.
If your kit / printer is equipped with a RAMBo board you will have a RAMBo / LCD Adapter Board in your kit this is identified in the 3rd picture. This adapteer board is not required when using the LCD with Mini-RAMBo boards.

Step 2 Prepping the LCD Controller

Remove the protective label from the Piezo buzzer

Remove the protective label from the Piezo buzzer
Remove the knob from the Rotary Encoder. This is a compression fit and removes by simply pulling it off.