You're viewing a previously published revision of this guide. View latest revision

May 30, 2016 - 08:05:41

Mar 06, 2025 - 11:03:50 Mar 06, 2025 - 11:03:54 Mar 06, 2025 - 11:03:44 Mar 06, 2025 - 11:03:51 Jun 07, 2016 - 08:06:10 Jun 07, 2016 - 08:06:07 Jun 03, 2016 - 11:06:21 May 31, 2016 - 05:05:32 May 31, 2016 - 05:05:35 May 31, 2016 - 05:05:46 May 31, 2016 - 05:05:18 May 31, 2016 - 05:05:03 May 31, 2016 - 05:05:27 May 31, 2016 - 11:05:41 May 31, 2016 - 11:05:13 May 31, 2016 - 11:05:53 May 30, 2016 - 08:05:30 May 30, 2016 - 08:05:38 May 30, 2016 - 08:05:16 May 30, 2016 - 08:05:31 May 30, 2016 - 08:05:50 May 30, 2016 - 08:05:19 May 30, 2016 - 08:05:41 May 04, 2016 - 01:05:50 May 04, 2016 - 01:05:06 May 04, 2016 - 01:05:12 May 04, 2016 - 01:05:17 May 04, 2016 - 01:05:58 May 04, 2016 - 01:05:47 Mar 30, 2016 - 09:03:54 Mar 30, 2016 - 09:03:34 Mar 30, 2016 - 09:03:00 Mar 30, 2016 - 09:03:43 Mar 30, 2016 - 09:03:28 Mar 30, 2016 - 09:03:08 Mar 30, 2016 - 09:03:49

Newer

Mirror Mount Sub Assembly

Written By: SeeMeCNC (and one other contributor)

Comments: 0
Favorites: 0

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Left Side

Attach the Mirror Mount Side to the Mirror Mount as shown in the video, pay particular attention to the part orientation.
There should be one spacer installed in between the Mirror Mount Side and the Mirror Mount.
The fasteners should be not be fully tightened. After the Mirror Mount is fully assembled you can tighten these screws up to the point that they are tight, but still allow the mirror to pivot.

Step 2 Right Side

Attach the Mirror Mount Side to the Mirror Mount as shown in the video, pay particular attention to the part orientation.
There should be one spacer installed in between the Mirror Mount Side and the Mirror Mount.
The fasteners should be snugged up but do not need to be overly tight.