You're viewing a previously published revision of this guide.  View latest revision

Older
May 31, 2016 - 11:05:24
Mar 06, 2025 - 11:03:34 Mar 06, 2025 - 11:03:54 Mar 06, 2025 - 11:03:01 Mar 06, 2025 - 11:03:15 Jun 14, 2016 - 11:06:19 Jun 14, 2016 - 10:06:23 Jun 14, 2016 - 10:06:19 Jun 14, 2016 - 10:06:19 Jun 14, 2016 - 10:06:13 Jun 14, 2016 - 10:06:47 Jun 14, 2016 - 10:06:06 Jun 14, 2016 - 10:06:42 Jun 14, 2016 - 10:06:59 Jun 14, 2016 - 10:06:12 Jun 14, 2016 - 10:06:35 Jun 14, 2016 - 10:06:37 Jun 14, 2016 - 10:06:07 Jun 14, 2016 - 10:06:41 Jun 14, 2016 - 10:06:59 Jun 13, 2016 - 01:06:28 Jun 13, 2016 - 01:06:59 Jun 13, 2016 - 01:06:07 Jun 13, 2016 - 01:06:45 Jun 13, 2016 - 01:06:47 Jun 13, 2016 - 01:06:18 Jun 13, 2016 - 01:06:16 Jun 13, 2016 - 12:06:37 Jun 13, 2016 - 12:06:04 Jun 13, 2016 - 12:06:25 Jun 13, 2016 - 12:06:05 Jun 13, 2016 - 12:06:28 Jun 13, 2016 - 12:06:04 Jun 13, 2016 - 12:06:18 Jun 13, 2016 - 12:06:50 Jun 13, 2016 - 12:06:12 Jun 13, 2016 - 12:06:41 Jun 13, 2016 - 12:06:27 Jun 07, 2016 - 08:06:39 Jun 03, 2016 - 11:06:38 May 31, 2016 - 11:05:24 May 31, 2016 - 11:05:37 May 31, 2016 - 11:05:11 May 31, 2016 - 11:05:51 May 31, 2016 - 11:05:05 May 31, 2016 - 11:05:23 May 31, 2016 - 10:05:09 May 31, 2016 - 10:05:13
Newer

Installing Firmware / Software

Written By: SeeMeCNC (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

    • Insert wisdom here.

    • Put microSD card into Raspberry Pi and turn the power to the Droplit v2 on

    • Connect an ethernet cable to the Raspberry Pi and your Router (this is a one time setup requirement until the wifi has been connected)

    • To find out your Raspberry Pi's IP address open your computer's network area. Or visit the online dashboard http://www.nanodlp.com/dashboard to see online nanoDLP printers in your network

Author

with 1 other contributor

SeeMeCNC

Member since: 9/11/15

13,012 Reputation

33 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 597