You're viewing a previously published revision of this guide. View latest revision

May 31, 2016 - 09:05:52

Mar 05, 2025 - 07:03:31 Mar 05, 2025 - 07:03:30 Mar 05, 2025 - 07:03:48 Mar 05, 2025 - 07:03:40 Mar 05, 2025 - 07:03:28 Jun 07, 2016 - 08:06:39 Jun 07, 2016 - 08:06:28 Jun 03, 2016 - 12:06:17 Jun 03, 2016 - 12:06:54 Jun 03, 2016 - 12:06:22 Jun 03, 2016 - 12:06:09 Jun 03, 2016 - 11:06:09 Jun 03, 2016 - 11:06:48 Jun 03, 2016 - 11:06:49 Jun 03, 2016 - 11:06:41 May 31, 2016 - 05:05:53 May 31, 2016 - 05:05:43 May 31, 2016 - 05:05:22 May 31, 2016 - 10:05:41 May 31, 2016 - 10:05:21 May 31, 2016 - 09:05:13 May 31, 2016 - 09:05:21 May 31, 2016 - 09:05:14 May 31, 2016 - 09:05:48 May 31, 2016 - 09:05:50 May 31, 2016 - 09:05:33 May 31, 2016 - 09:05:52 May 31, 2016 - 09:05:01 May 31, 2016 - 09:05:57 May 31, 2016 - 09:05:52 May 31, 2016 - 09:05:48 Mar 30, 2016 - 10:03:56 Mar 30, 2016 - 10:03:13 Mar 30, 2016 - 10:03:51 Mar 30, 2016 - 10:03:59 Mar 30, 2016 - 10:03:43 Mar 30, 2016 - 10:03:31 Mar 30, 2016 - 10:03:04

Newer

Carriage Assembly

Written By: SeeMeCNC (and one other contributor)

Comments: 0
Favorites: 0

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Carriage Assembly

Locate the (4) R4 Bearings and (8) Bearing Covers.
Start by laying a sleeve half on the table, face up. Set an R4ZZ bearing into it and firmly press it into place.
Now set another sleeve half on the table and press the R4ZZ bearing and sleeve into the new sleeve half to complete the carriage wheel.
Repeat this process for the (3) remaining bearings.

Step 2

Locate the Inner and Outer Spring Arms, shown in the animation.
The spring arm is easy to assemble, but the small posts are a very tight fit, so be careful when assembling them. Note that each arm half has an “inside” and “outside” to it.
Slide two sleeved R4ZZ bearings on to the outer spring arm posts as shown.
Next, press the inner spring arm on to the two mating posts that are on the outer spring arm. (Ensure the curvature of the spring arms are in the same orientation)