Skip to main content
  1. Open the system editor
    • Open the system editor

    • delete the file named "config-override.g" in the picture attached.

    • also delete the file that says "heightmap.csv"

    • press "Emergency Stop" button to reset the Duet control board.

  2. clear the nozzle and clear the bed
    • clear the nozzle and clear the bed

    • Be sure the bed and nozzle at room temperature, not hot

    • Choose "Machine Control"

    • click the "First Probe" macro

    • Wait for probing to finish. Once complete, shut the machine completely off using the power switch, wait 30 seconds, power it back on and reconnect.

    • You are now ready to start printing!

Finish Line

5 other people completed this guide.


Member since: 10/04/2016

562,208 Reputation

16 Guides authored

One Comment

Is this GUI available only connected to wifi or can it be accessed via ethernet as well.

Dillon Woodland - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 35

All Time: 2,771