Difficulty
Easy
Steps
2
Time Required
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
Take extra care with the FEP film to prevent scratching either side. When not using the FEP film you should lay it on a protected surface such as a paper towel or CLEAN shop towel.
-
The FEP sheet is pre-cut by SeeMeCNC and therefore has masking to protect the surface. Remove this mask by peeling off from one corner. Do not rush this process, you do not want to create any creases in the FEP film.
-
After you have removed the masking, lay the FEP film on a paper towel or CLEAN shop towel and use Isopropyl Alcohol to clean the surface of both sides. (Lens cleaning wipes would also work well)
-
-
-
Lay the FEP film on top of the VAT base as show in the image (note: the nut traps should be down against the table) Orientation of the FEP film does not matter, the part is symmetrical)
-
Use (12) 6-32 x 1/2" Socket Head Cap Screws and (12) Nylon Lock Nuts to attach the tension ring to the FEP file and VAT base.
-
Attached Documents
