Guide History - SeeMeCNC Guides

Edit History: Cura - DUET Dual Extrusion Setup

10/15/2019

02:33:12 PM	SeeMeCNC	Introduction edited Introduction (Accepted by SeeMeCNC)
02:33:06 PM	SeeMeCNC	Introduction edited Introduction (Accepted by SeeMeCNC)
02:33:06 PM	SeeMeCNC	Step #1 edited: [Step created] Step #1 (Accepted by SeeMeCNC)

12/04/2018

01:41:30 PM	geneb	Step #9 edited: [Step edited] Step #9 (Accepted by geneb)
01:38:03 PM	geneb	Step #3 edited: [Step edited] Step #3 (Accepted by geneb)
01:33:44 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
01:31:58 PM	Andy Oprisko	Step #2 edited: [Step edited] Step #2 (Accepted by Andy Oprisko)
01:31:13 PM	Andy Oprisko	Step #5 edited: [Step edited] Step #5 (Accepted by Andy Oprisko)
01:28:38 PM	Andy Oprisko	Step #3 edited: [Step edited] Step #3 (Accepted by Andy Oprisko)
01:12:22 PM	Andy Oprisko	Step #15 edited: [Step edited] Step #15 (Accepted by Andy Oprisko)
01:03:49 PM	Andy Oprisko	Step #13 edited: [Step edited] Step #13 (Accepted by Andy Oprisko)
01:01:04 PM	Andy Oprisko	Step #11 edited: [Step edited] Step #11 (Accepted by Andy Oprisko)
12:58:41 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
12:58:41 PM	Andy Oprisko	Step #10 edited: [Step created] Step #10 (Accepted by Andy Oprisko)
08:31:52 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
08:31:52 AM	Andy Oprisko	Step #9 edited: [Step created] Step #9 (Accepted by Andy Oprisko)
08:19:32 AM	Andy Oprisko	Step #8 edited: [Step edited] Step #8 (Accepted by Andy Oprisko)
08:14:50 AM	Andy Oprisko	Step #7 edited: [Step edited] Step #7 (Accepted by Andy Oprisko)
08:11:23 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
08:10:55 AM	Andy Oprisko	Step #6 edited: [Step edited] Step #6 (Accepted by Andy Oprisko)
08:07:44 AM	Andy Oprisko	Step #5 edited: [Step edited] Step #5 (Accepted by Andy Oprisko)
08:07:16 AM	Andy Oprisko	Step #6 edited: [Step edited] Step #6 (Accepted by Andy Oprisko)
07:25:15 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
07:25:15 AM	Andy Oprisko	Step #5 edited: [Step created] Step #5 (Accepted by Andy Oprisko)
07:20:57 AM	Andy Oprisko	Step #3 edited: [Step created] Step #3 (Accepted by Andy Oprisko)
07:19:43 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
07:11:18 AM	Andy Oprisko	Step #2 edited: [Step edited] Step #2 (Accepted by Andy Oprisko)

12/03/2018

07:47:27 AM

SeeMeCNC

Step #2 edited: [Step edited]

Step #2

(Accepted by SeeMeCNC)

09/22/2018

08:57:18 AM

SeeMeCNC

Step #2 edited: [Step edited]

Step #2

(Accepted by SeeMeCNC)

07/20/2018

05:54:18 AM

Andy Oprisko

Step edited: [Step edited]

Step

(Accepted by SeeMeCNC)

07/05/2018

01:00:23 PM

SeeMeCNC

Introduction edited

Introduction

(Accepted by SeeMeCNC)

07/03/2018

09:05:00 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
09:01:31 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
09:01:31 AM	Andy Oprisko	Step #17 edited: [Step created] Step #17 (Accepted by Andy Oprisko)

07/01/2018

08:17:02 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
08:17:02 AM	Andy Oprisko	Step #16 edited: [Step created] Step #16 (Accepted by Andy Oprisko)
08:11:56 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
08:11:56 AM	Andy Oprisko	Step #15 edited: [Step created] Step #15 (Accepted by Andy Oprisko)
08:02:06 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
08:05:40 AM	Andy Oprisko	Step #14 edited: [Step created] Step #14 (Accepted by Andy Oprisko)
08:00:07 AM	Andy Oprisko	Step #13 edited: [Step edited] Step #13 (Accepted by Andy Oprisko)

06/29/2018

01:41:11 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
01:41:11 PM	Andy Oprisko	Step #13 edited: [Step created] Step #13 (Accepted by Andy Oprisko)
01:30:44 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
01:30:44 PM	Andy Oprisko	Step #12 edited: [Step created] Step #12 (Accepted by Andy Oprisko)
01:09:37 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
01:09:37 PM	Andy Oprisko	Step #11 edited: [Step created] Step #11 (Accepted by Andy Oprisko)
12:43:04 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
12:43:04 PM	Andy Oprisko	Step #8 edited: [Step created] Step #8 (Accepted by Andy Oprisko)
12:32:13 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
12:32:13 PM	Andy Oprisko	Step #7 edited: [Step created] Step #7 (Accepted by Andy Oprisko)
12:17:59 PM	Andy Oprisko	Step edited: [Step edited] Step (Accepted by Andy Oprisko)
12:14:42 PM	Andy Oprisko	Step edited: [Step edited] Step (Accepted by Andy Oprisko)
12:14:17 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
12:14:17 PM	Andy Oprisko	Step edited: [Step created] Step (Accepted by Andy Oprisko)
12:13:50 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
12:13:50 PM	Andy Oprisko	Step edited: [Step created] Step (Accepted by Andy Oprisko)
12:04:20 PM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
12:04:20 PM	Andy Oprisko	Step edited: [Step created] Step (Accepted by Andy Oprisko)
11:40:47 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
11:40:47 AM	Andy Oprisko	Step #6 edited: [Step created] Step #6 (Accepted by Andy Oprisko)
11:29:35 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
11:29:35 AM	Andy Oprisko	Step #4 edited: [Step created] Step #4 (Accepted by Andy Oprisko)
11:28:50 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)
11:28:50 AM	Andy Oprisko	Step edited: [Step created] Step (Accepted by Andy Oprisko)
11:15:01 AM	Andy Oprisko	Step #2 edited: [Step created] Step #2 (Accepted by Andy Oprisko)
11:15:01 AM	Andy Oprisko	Introduction edited Introduction (Accepted by Andy Oprisko)

06/25/2018

02:07:45 PM

SeeMeCNC

Introduction edited

Introduction

(Accepted by SeeMeCNC)

SeeMeCNC Guides

Site Navigation

Your Account

Choose Language

Browse past guide revisions

Guide Ownership

Edit History: Cura - DUET Dual Extrusion Setup

10/15/2019

12/04/2018

12/03/2018

09/22/2018

07/20/2018

07/05/2018

07/03/2018

07/01/2018

06/29/2018

06/25/2018