SeeMeCNC Guides
/
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 33 —
Belt Tension

Step Type:

Drag to rearrange

To Tension the belts push the motor forward in the injection molded mount while feeling the belts. Once you have reached the desired tension. Tighten down the 3 screws that were left loose.

You do not want the belts too tight or too loose. Most importantly you want them all evenly tensioned. Arrange the 3 carriages so they are at the same height on the rails and do your best to match the tension on each belt.

Your contributions are licensed under the open source Creative Commons license.