Help
Editing Step 6 —
Removing Side Panels

Step Type:

Drag to rearrange

Next Step is removing the laser cut and injection molded side panels from the Laser Cut Plate.

First, unscrew the 10-32 x 5/8"L bolts holding the laser cut side panels to the injection molded side panels. There will be 6 in total

Second, unscrew the 6-32 1"L screws from the injection molded side panels. There will 6 of these screws located on the bottom of the Laser Cut Panel

Again be sure and keep all hardware the you remove from the machine as you will need it when its time to put it all back together.

Your contributions are licensed under the open source Creative Commons license.