Skip to main content
Editing Step 2 —

Step Type:

Drag to rearrange

If your touchscreen kit does not look like the picture, STOP! And LOOK for the newer MAY2018 UPDATE.

NOTE: This guide is intended to be followed online in order to fully utilize the links and documentation found within.

First, click here to read safety information . This safety information may be updated at anytime so occasionally check for updates.

Open and inspect the contents of your touch screen kit to ensure you have all the parts listed on the BOM.

Begin by peeling the protective transfer tape from the laser cut wood panels.

You will need to 3D print the bezel for the screen, so you may wish to do that before getting started with the installation. You can get the files for the bezel from here: 5 INCH TOUCH SCREEN CONTROLLER KIT FOR V3.2. You will need to print both the front and the back bezel parts.

Your contributions are licensed under the open source Creative Commons license.