Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

All SeeMeCNC Printers utilize the same LCD screen. The SD card is inserted on the left-hand side of the controller. When inserting the SD card, the gold contacts should be facing towards you (as shown in the first image).

Once you have inserted the SD card into the SD card reader the printer will automatically recognize its presence and show you a list of all the files on the card.

You can use the encoder to navigate to and select the file that you wish to print.

Once you have selected a print file, the print will not begin until the target temperatures have been reached. NOTE: Some slicing engines heat both bed and hot end at the same time, other heat the bed first and then the hot end.

Only .GCODE files can be printed from the SD card. You can not send .STL files directly to the printer. They must be processed through a slicing engine first.

Your contributions are licensed under the open source Creative Commons license.