Skip to main content
Editing Step 2 —

Step Type:

Drag to rearrange

Uninstall your stock extruder on the Rostock Max v3 by removing the 4 screws fastening the extruder to the stepper motor.

Remove the blue stepper motor knob.

Remove the (2) 10-32 screws attaching the side plate to the printer frame.

Remove the extruder and side plate from the printer.

Remove the (2) 6-32 machine screws and nylon lock nuts fastening the extruder to the extruder motor plate.

Make all attempts to keep the extruder together to prevent the spring from becoming sprung.

Your contributions are licensed under the open source Creative Commons license.